SuperTie™ Patented Coil Rod Series
SuperTie™ patented fiberglass form-tie systems are used to secure concrete formwork during concrete placement and initial hydration, without the inherent limitations of previously popular steel form-tie systems. SuperTie™ systems eliminate the possibility of rust stains, as well as the structural deterioration often caused by failure of patching for steel form-tie holes.
SuperTie™ CRFF1000 (1”)
SuperTie™ Coil Rod Form Fixture 1” offers a 17,000 pounds safe working load and is most commonly used with job-built (plywood and 2×4) forms and handset modular forms. The fiberglass rod diameter is 1” making the system compatible with most commercial forming systems.
SuperTie™ Bearing Plate BP300
Non-Corrosive Fiberglass Coil Rod (CR1000)
RJD Fiberglass Coil Rod (1”) utilizes a specially blended and formulated custom-engineered resin, made in the USA, combining ultimate tensile strength and the RJD Form Fixture (CRFF) strength.
RJD Fiberglass Coil Rod will never rust, eliminating the need for breakback, plugging, and patching and allowing for superior architectural finishes.
(Do not use any non-RJD engineered rod with RJD gripper or form fixture; this could result in form failure and/or injury.)
COMPONENT LIST
| PRODUCT # | DESCRIPTION | PACKAGING | SHIP WT |
|---|---|---|---|
| CR1000 | 1″-dia. FRP Coil Rod, 17,000 pound safe working load, 9’8″ lengths, grey color. |
As Ordered | 4.5 lbs. per 8′ |
| ***Also available in 4’8″, 4’10” and 5′.*** | |||
| CRFF1000 | Form Fixture | As Ordered | 2.5 lbs. per each |
| BP300 | Bearing Plate | As Ordered | 2.1 lbs. per each |
Standard CR1000 Rod Color: Grey.
For custom rod lengths, please call for quote and lead times.
When determining tie spacings, refer to guidelines in ACI 347R-14. All formwork load calculations shall be preformed by a qualified engineer. Failure to do so may result in form failure or injury.
SuperTie Systems are sold exclusively through quality construction materials dealers. Call for the name of the dealer nearest you.