SuperTie™ Patented Gripper and Smooth Rod System
Eliminate corrosion and rust stains while reducing man-hours and costs.Superior Concrete Wall Form Tie System
SuperTie™ patented fiberglass wall form tie systems are used to secure concrete formwork during concrete placement and initial hydration, without the inherent limitations and rusting of previously popular steel form tie systems. RJD SuperTie™ can be manufactured in a broad array of colors. The RJD fiberglass tie will never rust, therefore no breakback removal or snap-tie cone patching is ever required, creating superior architectural finishes. There’s a significant reduction of wall-forming labor costs when using the SuperTie™ fiberglass wall form tie system, and it works well with anything from handset wall forms to crane-set modular form systems.
US Patent #7,819,388
SuperTie™ R6 (.308 Rod) GND6000
SuperTie™ R6 Patented Gripper System offers a safe working load of 3,000 pounds and is most commonly used with job-built (plywood and 2×4) forms and handset modular forms.
SuperTie™ R15 (.500 Rod) GND15000
SuperTie™ R15 Patented Gripper System offers a safe working load of 7,000 pounds. This system’s greater strength makes it attractive to those who need heavier forms and higher concrete placement rates.
Non-Corrosive Fiberglass Smooth Rod
RJD Fiberglass Smooth Rod utilizes a specially blended and formulated custom-engineered resin, made in the USA, combining ultimate tensile strength and maximizing the RJD Gripper strength. (Do not use any non-RJD engineered rod with RJD grippers; this could result in form failure and/or injury.) RJD Fiberglass Smooth Rod will never rust, eliminating the need for breakback, plugging, and patching and allowing for superior architectural finishes. RJD Fiberglass Smooth Rod is offered in .308 and 0.500 diameters with a selection of colors available for each size.
RJD Fiberglass Smooth Rod Colors:
0.308 Rod: Gray, tan, white, black, and brown
0.500 Rod: Gray
SuperTie™ Smooth Rod Accessories
SpreaderClip™ (.308 & .500) SC6000 & SC15000
The SpreaderClip™ is an internal form-spreading mechanism facilitating .308 or 0.500 RJD Fiberglass Rod cut to exact wall width.
WaterStop™ (.308 and .500)
WaterStop™ is used when specifications require a waterstop washer. Although this device is made available, certified tests show that SuperTie™ performs equally well with or without WaterStop™.
SuperTie™ Bearing Plate BP615
The Bearing Plate is a required component with the SuperTie™ Gripper. BP615 is a 4”x4” steel plate that fits the R6 and R15 systems.